-
30kV ESD GunElectrostatic discharge (ESD) is a common natural phenomenon. The effects of ESD on electrical and electronic equipment, devices or systems are everywhere and it is a highly harmful electromagnetic
-
20kV ESD GunElectrostatic discharge (ESD) is a common natural phenomenon. The effects of ESD on electrical and electronic equipment, devices or systems are everywhere and it is a highly harmful electromagnetic
-
ESD Test BenchESD1700 ESD (electrostatic discharge) test set-up is for table-top/floor-standing equipment laboratory tests (ESD immunity test environment configuration), which is designed as per standard IEC/EN
-
Combination Wave Surge GeneratorSurge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. Another source for surge pulses is switching transients originating from switching disturbances and
-
10kV Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
Single Phase 10A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Power Frequency Magnetic Field CoilPower frequency magnetic field coil PFM 1000 and the power frequency magnetic field generator can be used together. It also can be used with pulse magnetic field generator. PFM 1000 power frequency
-
Impulse Magnetic Field Generator PFM S9Impulse Magnetic Field Generator PFM S9 can meet the requirements of standard IEC 61000-4-9 and GB/T 17626.9. Impulse magnetic fields are generated by lightning strikes on buildings and other
-
Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system.A
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
HBM MM ESD Immunity Tester ESD 8KESD 8K is specially designed for the characteristics and requirements of ESD immunity test of human body model (HBM) and machine model (MM), and is divided into HBM electrostatic test model and MM
EMC General Test Equipments Equipments or test systems can be operated in a certain electromagnetic environment without interference with any other device. · Multifunctional... · ESD Simulators ·...
ESD simulator is used to simulate/generate the ESD pulses as per all international EMC standards such as IEC/EN 61000 4-2 to test the immunity of the electrical and electronic equipment against ESD....
EMC Test and Measurement System ESD-Simulator 30 kV IEC / EN 61000-4-2 The test generator SESD 216 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2....
EMI and EMC Test Systems. EMI-9KC/EMI-9KB EMI Receiver System; EMS-ISO7637 Multifunctional Immunity Test System For Automotive Electronics; ESD61000-2 Electrostatic...
Schlöder GmbH develops and manufactures EMC test equipment since 30 years. In addition to the ESD test systems, EFT/Burst generators, Combined Wave generators, Voltage Dips, Interrupts and Variations...
EMC Test and Measurement System ESD-Simulator 30 kV IEC / EN 61000-4-2 The test generator SESD 216 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the...
