-
Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system.A
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
Three Phase Surge Burst Transient GeneratorMulti-function immunity tester can carry out electrostatic discharge immunity, electrical fast transient/ burst immunity and surge (impact) immunity test. It is multifunctional combination immunity
-
Combination Wave Surge GeneratorSurge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. Another source for surge pulses is switching transients originating from switching disturbances and
-
High Voltage Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
EMC Test 3Phase Surge Immunity GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
SPD Surge GeneratorLightning surge generators SOSIN 2/10, SUR 1000, SUR 360 and other products are anti-surge test products designed specifically for anti-surge protection and other semiconductor devices and
-
Single Phase 10A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Three Phase 20A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Surge Generator For SPDs TestingLightning surge generator SUR 350L is anti-surge test devices specially designed for semiconductors such as surge protective devices (SPDs) and communication products. Equipment can fully meet the
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
HBM MM ESD Immunity Tester ESD 8KESD 8K is specially designed for the characteristics and requirements of ESD immunity test of human body model (HBM) and machine model (MM), and is divided into HBM electrostatic test model and MM
IEC 61000 4 12 Ring Wave Immunity Testing Lab with EMC. EN IEC 61000 4 4 Surge Immunity Testing The EMC Shop. Teseq IEC EN 61000 4 8. Burst EFT Generator Rentals EMI Test Equipment Rentals. EN 61000...
The EN 61000-4-12 test standard is harmonized with the IEC 61000-4-12 test standard. It also relates to the immunity requirements and test methods for electrical and electronic equipment. The...
Rent Haefely PIM 110 Ring Wave Generator per EN/IEC 61000-4-12 - The EMC Shop Rent Haefely PIM 110 Ring Wave Generator per EN/IEC 61000-4-12. The EMC Shop specializes in conducted disturbance and...
Warranty: 1 Year Product Name: EMC Test Equipment IEC 61000-4-12 Ring Wave Genera Standard: IEC 61000-4-12 Application: Ring Wave Immunity Test Output Voltage: 0.2~6kv Oscillation Frequency: 100kHz...
the iec 61000-4-12 test standard is harmonized with the en 61000-4-12 test standard and relates to the immunity requirements and test methods for electrical and electronic equipment, under...
Ring Wave Generator is the test equipment in conformity to IEC (the International Electro technical Commission) standard IEC61000-4-12, EN61000-4-12, ANSI-C62-41 and GB/T17626.12....
