-
Impulse Magnetic Field Generator PFM S9Impulse Magnetic Field Generator PFM S9 can meet the requirements of standard IEC 61000-4-9 and GB/T 17626.9. Impulse magnetic fields are generated by lightning strikes on buildings and other
-
20kV ESD Gun20kV Electrostatic Discharge (ESD) Generator, also known as ESD simulator, ESD Tester, ESD Gun, ESD Interference Tester etc.Our self-developed 20 kV ESD generator is designed to evaluate the working
-
30kV ESD GunOur company independently develops and manufactures 30kV ESD (electrostatic discharge) generators. The maximum output voltage is up to 30kV. It is mainly used to simulate electrostatic shocks in
-
1kV Surge GeneratorSurge generator SOSIN 8/20 is designed especially for telecom/communications, digital products and anti-surge semiconductor devices. The open circuit voltage is up to 1000V. Product can fully meet
-
Telecom Surge GeneratorLightning surge generator SUR 700, SUR 700L are specially designed for communication products. It is used to evaluate the performance of communication products when subjected to high-energy
-
Data Line Coupling NetworksCDN-I/O, CDN-I/OE are designed for communication/telecom products and other signal lines coupling/decoupling surge test network. It can be tested in single, double(1-pair), four(2-pair) and eight
-
10kV Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
High Voltage Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
Single Phase 20A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Ring Wave Generator RWI T6A ring wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to ring wave. Ring wave is caused by power supply and control line
The MIL-STD-461 CS116 test method evaluates the coupling effects of EMP on metallic interconnecting lines. The intent of this test is to ensure the equipment’s ability to withstand conducted damped...
Magnetic field immunity test is one of the EMC tests. It is sometimes called magnetic immunity test. For this test, a current source is used to generate a magnetic field. The frequency of...
Apr 08, 2022 · Immunity to impulse magnetic fields is covered by IEC 61000-4-9 standard which defines a test procedure and immunity levels. Test levels covered by typical equipment go up to a few...
Calibration requirements for impulse magnetic field immunity test system as per IEC 61000-4-9 standard Abstract: The IEC 61000-4-9:2016 standard is used to demonstrate the immunity of...
IEC 61000-4-9 Immunity Testing of Pulse Magnetic Fields IEC 61000-4-9 demonstrates pulse magnetic field immunity requirements under operational conditions. As a leader in...
Jun 04, 2015 · The most common type of magnetic field immunity testing is what's called 'AC power line' which means that the magnetic field generating transducer will be driven with a 50/60 Hz signal...
