-
Three Phase 5kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Single Phase 5kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
Three Phase Surge Burst Transient GeneratorMulti-function immunity tester can carry out electrostatic discharge immunity, electrical fast transient/ burst immunity and surge (impact) immunity test. It is multifunctional combination immunity
-
Multi-function Surge GeneratorLightning Surge Generator SUR S10L, SUR T10L can generate 1.2/50μs and 10/700μs surge waveform. The surge immunity test equipment is designed for various electronic and electrical product power ports
-
Lightning Surge SimulatorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
Power Frequency Magnetic Field Generator 1200A/mPower frequency magnetic field is generated by the power current in the conductor, or (very little) by the attachment of other devices (such as the transformer leakage flux). Power frequency magnetic
-
Power Frequency Magnetic Field CoilPower frequency magnetic field coil PFM 1000 and the power frequency magnetic field generator can be used together. It also can be used with pulse magnetic field generator. PFM 1000 power frequency
-
Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system.A
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
HBM MM ESD Immunity Tester ESD 8KElectrostatic discharge (ESD) is a common natural phenomenon. The ESD 8K is specially designed in accordance with the characteristics and requirements of electrostatic discharge immunity tests for
Rent electrical fast transient (EFT) systems/burst generators designed for testing for 1- & 3-phase applications to IEC 610000-4-4 (including CCLs). These conducted immunity transient systems offer...
Eft Burst Simulator for Eft Immunity Test System. Switching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic...
EFT 500Nx series – an EFT/Burst generator – is an intelligent solution offering exactly what you need for full-compliance immunity tests against Electrical/Fast transients phenomena. The distinct...
EM Test EFT 500N5 Electrical Fast Transient/EFTBurst Simulator The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or...
EFT 500Nx series – an EFT/Burst generator – is an intelligent solution offering exactly what you need for full-compliance immunity tests against Electrical/Fast transients phenomena. The...
Your Current Position:Home > Products > EFT/Burst Simulator. EFT/Burst Simulator EFT61004TA. Meet EN/IEC61000-4-4 Standards. Output Voltage 0-4.8KV Build-in 1/3phase...
