-
Single Phase 5kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
20kV ESD Gun20kV Electrostatic Discharge (ESD) Generator, also known as ESD simulator, ESD Tester, ESD Gun, ESD Interference Tester etc.Our self-developed 20 kV ESD generator is designed to evaluate the working
-
Three Phase 5kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Damped Oscillatory Magnetic Field GeneratorDamped oscillatory magnetic fields are generated by the switching of H.V. bus-bars by isolators or disconnectors. The magnetic fields to which equipment subjected can influence the reliable operation
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
10kV Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
High Voltage Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
SPD Surge GeneratorLightning surge generators SOSIN 2/10, SUR 1000, SUR 360 and other products are anti-surge test products designed specifically for anti-surge protection and other semiconductor devices and
-
Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system.A
-
Three Phase 32A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
EM Test Electrical Fast Transient Burst Generators. EM TEST offers high-end EFT/burst generators with maximum pulse amplitude and spike frequency capabilities, best user...
and measurement techniques — Electrical fast transient/burst immunity test. [2] Martzloff, F., Leedy, T.F. (1990) Electrical ... Parameters Simulation of Electrical Fast Transient Generator ......
Rent CCLs & Couplers for 3-Phase Power. Price Match Guarantee. Request A Quote. Teseq. Rent Teseq CDN3083-B100 - 100A/690V 3phase CDN for EFT/Burst....
The test voltage of burst generator is from 0.25KV to 5KV, which can cover all the test levels, and user can define the test level. The high amplitude, short rise time, high repetition rate are...
Setting up Transient Generator for Electrical Fast Transient/Burst Testing. Setting up for Electrical Fast Transient/Burst compliance testing per EN/IEC 61000-4-4. Using the coupling...
Electrical Fast Transient (EFT)/Burst generators are required for conducted immunity testing standards, such as IEC/EN 61000-4-4. Electrical Fast Transient EFT/Burst events are small...
