-
Impulse Magnetic Field Generator PFM S9Impulse Magnetic Field Generator PFM S9 can meet the requirements of standard IEC 61000-4-9 and GB/T 17626.9. Impulse magnetic fields are generated by lightning strikes on buildings and other
-
Single Phase 5kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
1kV Surge GeneratorSurge generator SOSIN 8/20 is designed especially for telecom/communications, digital products and anti-surge semiconductor devices. The open circuit voltage is up to 1000V. Product can fully meet
-
Data Line Coupling NetworksCDN-I/O, CDN-I/OE are designed for communication/telecom products and other signal lines coupling/decoupling surge test network. It can be tested in single, double(1-pair), four(2-pair) and eight
-
10kV Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
EMC Test 3Phase Surge Immunity GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
SPD Surge GeneratorLightning surge generators SOSIN 2/10, SUR 1000, SUR 360 and other products are anti-surge test products designed specifically for anti-surge protection and other semiconductor devices and
-
Power Frequency Magnetic Field Generator 1200A/mPower frequency magnetic field is generated by the power current in the conductor, or (very little) by the attachment of other devices (such as the transformer leakage flux). Power frequency magnetic
-
Damped Oscillatory Wave GeneratorDamped oscillatory wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to damped oscillatory waves. Damped oscillatory waves
-
Three Phase Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system. A
-
Three Phase 32A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Ring Wave Generator RWI T6A ring wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to ring wave. Ring wave is caused by power supply and control line
Key-Words: - impulse magnetic field, calibration, magnetic field generator, magnetic field measurement, lightning protection, fiber transmission system 1 Introduction The damage to the information...
IMF61000-9 impulse magnetic field immunity tester is high performance test instrument which special designed for to do impulse magnetic field immunity test and fully meet IEC61000-4-9, EN61000-4-9...
The intent of this test is to ensure the equipment’s ability to withstand conducted damped sinusoidal transients, excited by platform switching operations, indirect effects of lightning, and EMP. The...
Magnetic Field Generator. PFM61000-8A - Lisun Electronics Inc. ... IMF61000-9 impulse magnetic field immunity tester is high performance test instrument which special designed for to do...
Impulse Voltage Generator 1200V for Impulse Withstand Test. Surge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads...
Oct 27, 2016 · A spark gap is used to dump a large amount of magic pixies into the coil all at once, which generates a strong enough magnetic pulse to induce an unexpected voltage inside...
