Automobile is a complex system, and electromagnetic compatibility needs to be analyzed as a whole. However, too complex models are often beyond people's ability to solve them. Therefore, electromagnetic compatibility analysis of automobiles is mostly based on specific specific problems with some simplified methods. method.
1. Vehicle analysis
The whole vehicle analysis of automotive EMC is mainly to study the emission and coupling of electromagnetic radiation in the vehicle. Since the car body is a metal material, it has a great influence on the electromagnetic field distribution. The influence of the shape and size of the car body on the interference needs to be analyzed and judged through the electromagnetic field calculation. The calculation amount is very large. In this case, the radiation source signal Generally, the result of circuit analysis is used as a known quantity, or the source and field are connected through a loose coupling. Field calculation methods include finite element method, method of moments, finite difference time domain method, and a hybrid method of finite difference and finite volume element, etc. The calculation of field sources in wires generally uses the transmission line method. Various field calculation methods have their own characteristics. The finite element method is easy to deal with problems of multiple media and complex structures, but the external boundary conditions of the open domain are not easy to determine; the method of moments is easy to construct car body models, but it is not easy to deal with multiple media problems; The finite-difference time-domain method is easy to deal with transiently changing fields, but the curved surface profile of the model boundary can only be represented by a step shape.
2. Crosstalk analysis
There are many kinds of wires in a car, and they are often tied together, so the crosstalk between them is a key concern. For low-frequency interference signals, considering the coupling of their electric and magnetic fields, the lumped parameter model can be used for analysis; but when the interference signal frequency is as high as hundreds of MHz, the influence of signal transmission delay must be considered. Therefore, the transmission line The method and the multi-conductor transmission line method have become the main methods for analyzing crosstalk. At the same time, test measurement is also an indispensable tool.
When analyzing the crosstalk between wires in a car, a very important issue needs to be considered, that is, the uncertainty in the wire layout, that is, the actual distance between the wire harness and the car body is not exactly the same in each car, and in the same car The distance between different parts is different, and the distance between any two wires in the wire bundle cannot be completely determined. Therefore, the analysis of the crosstalk needs to consider the randomness of the wire layout, and use the probability method to calculate its possible interference and occurrence. probability.
3. Grounding problem
For cost considerations in automobiles, the power supply generally adopts a single-wire system, that is, a wire is used to connect from the positive end of the power supply to the positive end of the electrical equipment, and the path from the negative end of the equipment back to the negative end of the power supply is not connected by wires, but The negative ends of the power supply and the equipment are grounded, and the return current flows through the ground system, where the ground includes the car body, the engine case and the ground wire. Since different equipment and circuits use a common ground system, the chances of interference between different signals are increased; since the ground is not a complete plane, but is composed of multiple conductors, the flow of internal current will be limited. Makes the path of the return current difficult to predict, thereby increasing the difficulty of interference analysis.
In addition to the issues listed above, automotive EMC research also includes specific issues in automotive electronic systems, such as power supply system, voltage conversion, battery characteristics, motor drive, analog circuit interference, numerical control systems, etc. These issues can generally be general EMC analysis and processing methods.
The current EMC research can not fully provide an effective engineering method to solve the automotive EMC problem, and further development is needed. In the analysis of the whole vehicle system, the contradiction between realistic modeling and huge calculation is the key problem to be solved, which requires model accuracy and algorithm efficiency; crosstalk and grounding problems in the vehicle need to be further improved from the mechanism and algorithm. ; The expert system needs to be continuously improved in practical applications; new problems arising with the development of automotive technology also need to be continuously discovered and resolved.
