Each device has its own independent precautions for use.
Lightning surge generator is no exception. However, we found that many people often ignore some precautions when using lightning surge generator equipment, which cause frequent equipment failures over time and affecting the progress of the work. Therefore, everyone should take it seriously. Today I will tell you what are the precautions of using lightning surge generator.
Precautions for using lightning surge generator
1. Lightning surge generator testers must be trained and qualified before operating the equipment. Do not use this equipment when the hands are wet or the relative humidity exceeds 75%;
2. Because there are high-voltage pulses added to the output terminals (such as 2W, 500W, L1, L2, L3, etc. ports), if you change the wiring, you must confirm that the high-voltage power supply is disconnected before proceeding;
3. The F.G. terminal of the lightning surge generator must be well grounded;
4. The lightning surge generator uses a high-voltage mercury switch to generate high-voltage pulses. It is strictly prohibited to conduct tests when the equipment is tilted. It contains high voltage. Do not disassemble or open the casing at will. When an emergency occurs, press the EMERGENCY key of the instrument. Will quickly stop the surge output, turn off the internal high voltage, and quickly cut off the power supply;
5. To ensure the comparability and repeatability of the lightning surge generator test, the test configuration must be standardized. Non-relevant personnel are strictly prohibited from operating this instrument.
For more details of EMCSOSIN lighting surge generator, please do not hesitate to contact us.
