-
Three Phase 5kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Single Phase 5kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
20kV ESD Gun20kV Electrostatic Discharge (ESD) Generator, also known as ESD simulator, ESD Tester, ESD Gun, ESD Interference Tester etc.Our self-developed 20 kV ESD generator is designed to evaluate the working
-
Damped Oscillatory Magnetic Field GeneratorDamped oscillatory magnetic fields are generated by the switching of H.V. bus-bars by isolators or disconnectors. The magnetic fields to which equipment subjected can influence the reliable operation
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
Three Phase Surge Burst Transient GeneratorMulti-function immunity tester can carry out electrostatic discharge immunity, electrical fast transient/ burst immunity and surge (impact) immunity test. It is multifunctional combination immunity
-
Power Frequency Magnetic Field CoilPower frequency magnetic field coil PFM 1000 and the power frequency magnetic field generator can be used together. It also can be used with pulse magnetic field generator. PFM 1000 power frequency
-
Surge Generator For SPDs TestingLightning surge generator SUR 350L is anti-surge test devices specially designed for semiconductors such as surge protective devices (SPDs) and communication products. Equipment can fully meet the
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Ring Wave Generator RWI S6A ring wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to ring wave. Ring wave is caused by power supply and control line
-
Ring Wave Generator RWI T6A ring wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to ring wave. Ring wave is caused by power supply and control line
Test level IEC 61000-4-4: Ed3.0 (2012-4) The use of 5 kHz repetition frequency is traditional, however, 100 kHz is closer to reality. Product committees should determine which frequencies...
IEC 61000-4-4 - EFT/Burst Immunity Test Equipment Rentals 4kV Burst Pulses Rent 4kV Fast Transient Generators Rent & Lease IEC 61000-4-4/-5 Compliant Generators Teseq, EM Test, Haefely, KeyTek, & EMC...
A built in 3 phase coupler capable of 690V per line at 32 amps, any DUT can be hooked up and injected with EFT for evaluation and compliance to IEC 61000-4-4, ANSI C62.41, IEC 60601-1-2 and all other...
Display: LCD Product Name: IEC 6100044 Burst Generator Standard: IEC/ En 61000-4-4 Application: Eft/Burst Immunity Testing Eft Output Voltage: 0.1~ 5kv Ilac Calibration Certificate: Available...
The company is committed to the research and development of high-tech, and transforms the research results into products and productivity, and exerts its effectiveness in complete sets of ISO 7637,...
Teseq IEC EN 61000 4 8. Burst EFT Generator Rentals EMI Test Equipment Rentals. EN 61000 4 18 EM Test. IEC 61000 4 9 EM Test. IEC 61000 6 4 2018 IEC Webstore electromagnetic. ... IEC 61000 4 4 Fast...
