-
Damped Oscillatory Wave GeneratorDamped oscillatory wave generator is used to evaluate the performance of electrical and electronic equipment, devices or systems subjected to damped oscillatory waves. Damped oscillatory waves
-
20kV ESD Gun20kV Electrostatic Discharge (ESD) Generator, also known as ESD simulator, ESD Tester, ESD Gun, ESD Interference Tester etc.Our self-developed 20 kV ESD generator is designed to evaluate the working
-
Three Phase 5kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
Surge Burst Transient GeneratorMulti-function immunity tester is able to carry out ESD (electrostatic discharge), EFT (electrical fast transient)/ burst and surge immunity test. It is multifunctional combination immunity test
-
Three Phase Surge Burst Transient GeneratorMulti-function immunity tester can carry out electrostatic discharge immunity, electrical fast transient/ burst immunity and surge (impact) immunity test. It is multifunctional combination immunity
-
Combination Wave Surge GeneratorSurge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. Another source for surge pulses is switching transients originating from switching disturbances and
-
High Voltage Surge GeneratorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
Lightning Surge SimulatorSurge pulses occur due to direct or indirect lightning strikes or by power system switching transients caused by switching inductive loads or short circuits. This leads to currents or electromagnetic
-
SPD Surge GeneratorLightning surge generators SOSIN 2/10, SUR 1000, SUR 360 and other products are anti-surge test products designed specifically for anti-surge protection and other semiconductor devices and
-
Single Phase 20A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
Overview. EN/IEC 61000-4-18 sets for the requirements for testing for repetitive damped oscillatory waves occurring mainly in power, control and signal cables. This standard defines test levels, test...
IEC 61000 4 18 damped oscillatory wave generator FirstPrev12345NextLast1/5 Add to Inquiry Damped Oscillatory Wave Generator Damped oscillatory waves appearing on equipment...
IEC 61000-4-18 Ed.1 ANSI C37.90 IEC 60255-22-1 IEEE 1613 100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV Selectable source impedance of 200 Ω and 150 Ω Pulse repetition rate exceeds...
We're well-known as one of the leading IEC 61000 4 18 damped oscillatory wave generator manufacturers and suppliers in China. Please feel free to buy customized IEC 61000 4 18...
IEC 61000-4-18 Ed.1 ANSI C37.90 IEC 60255-22-1 IEEE 1613 100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV Selectable source impedance of 200 Ω and 150 Ω Pulse repetition rate exceeds...
As a particularity, IEEE/ANSI C37.90.1 allows application of slow damped oscillatory waves on communication lines with a capacitive coupling clamp (IEC 61000-4-18 does not recommend this practice for...
