-
Three Phase 5kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
-
Single Phase 5kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
20kV ESD GunElectrostatic discharge (ESD) is a common natural phenomenon. The effects of ESD on electrical and electronic equipment, devices or systems are everywhere and it is a highly harmful electromagnetic
-
Damped Oscillatory Magnetic Field GeneratorDamped oscillatory magnetic fields are generated by the switching of H.V. bus-bars by isolators or disconnectors. The magnetic fields to which equipment subjected can influence the reliable operation
-
30kV ESD GunElectrostatic discharge (ESD) is a common natural phenomenon. The effects of ESD on electrical and electronic equipment, devices or systems are everywhere and it is a highly harmful electromagnetic
-
Capacitive Coupling ClampEFT 4C capacitive coupling clamp is used together with EFT/burst generator. It is used to do EFT/burst interference test of the I/O data signal line port. Its main purpose is coupling the EFT/burst
-
Telecom Surge GeneratorLightning surge generator SUR 700, SUR 700L are specially designed for communication products. It is used to evaluate the performance of communication products when subjected to high-energy
-
Power Frequency Magnetic Field CoilPower frequency magnetic field coil PFM 1000 and the power frequency magnetic field generator can be used together. It also can be used with pulse magnetic field generator. PFM 1000 power frequency
-
Ring Wave GeneratorRing wave is caused by power supply and control line switches or lightning strike and appears on the terminal of devices. The ring wave may affect the reliable operation of equipment and system.A
-
Three Phase 32A Voltage Dips GeneratorVoltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or
-
Single Phase 6kV EFT/Burst GeneratorEFT/burst generator or transient generator or voltage spike generator is used for evaluating the performance of electrical and electronic equipment power supply, signal, control & earth ports when
-
Three Phase 6kV EFT/Burst GeneratorSwitching the transient process (to cut off inductive load, relay contact bounce, etc.) usually interferes with other electrical and electronic equipment in the same circuit. This type of
Electrical fast transient (EFT) or burst generators provide series of fast rise time and duration (5μs/50μs) pulses at set frequencies required for immunity testing including compliance to IEC...
The AXOS 5 - EFT/Burst is a stand-alone 5kV EFT/Burst Generator with an integrated single phase coupling decoupling network (CDN) for EMC testing applications up to 16A. The AXOS 5 - EFT/Burst can...
5kV EFT/Burst & Surge Immunity Generator System. Front Panel Attenuated Voltage & Current Monitoring. Built In 264v/16A AC 220V/10A DC Single Phase Coupler. Rent FP-COMB 32 3-Phase 480V/32Amp AC/DC...
The FCC-TG-EFT is a capacitive discharge type of pulse generator designed to generate a 5ns x 50ns double exponential shape output pulse. It is designed primarily to drive small loop...
This coupling mechanism can be simulated by a low-impedance pulse-current source, such as the P202 generator (≈ 1 Ω). The pulse voltage is adjustable within the range of ± (0.5 - 40) V. The L-EFT...
2.1 Characteristics of EFT Waveform Figure 2 shows the wave shape of a single pulse terminated into a 50 ohm load as defined by the IEC 61000-4-4 specification. Each individual pulse is a...
