Our new IEC 61000 4 5 Lightning Surge Simulator, Power Frequency Magnetic Field Coil, impulse surge generator have the ability of low cost and rapid response to the market, which is the key to our rapid development and market share. We adhere to the principle of progress in stability and excellence in stability, and continue to adjust and optimize the industrial structure. Be sure to come to feel free to get in touch with us in case you need any additional assistance.
Overview
Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. Another source for surge pulses is switching transients originating from switching disturbances and systems faults. This leads to currents or electromagnetic fields causing high voltage or current transients. The energy is particularly large. And the impact on the product might be destructive. A lightning surge generator is used to evaluate the performance of device subjected to high energy disturbances from the power line port and other signal line ports. Our surge generators simulate these disturbances for all the necessary voltage levels in accordance with IEC/EN 61000-4-5 and GB/T 17626.5 standards. SUR S6/S8 is compliant with standard IEC/EN 61000-4-5, up to 6kV/8kV output voltage, with internal voltage/current probe for pulse monitoring.
Features
● User friendly 7" touch panel display
● Support multi-language & facilitate users
● Built-in environment self-test program
● Pre-programmed IEC 61000-4-5 standard test level parameters, easy to operate
● EUT intelligent detection
● Built-in voltage, current probe for pulse monitoring
● RS232/USB interface, for PC control operation & printable test report
Technical Data
|
Model |
SUR S6 |
SUR S8 |
|
Surge waveform |
Open-circuit voltage wave: 1.2/50μs |
|
|
Open-circuit voltage |
0.2~6kV |
0.2~8kV |
|
Short-circuit current |
0.1~3kA |
0.1~4kA |
|
Polarity |
Positive/negative/alternating |
|
|
Phase |
0 ~ 359° synchronous, asynchronous, automatic |
|
|
Effective output impedance |
2Ω (common mode 12Ω) |
|
|
Coupling/decoupling network |
Built-in, single-phase three-wire, 16A (Customer specific on demand) |
|
|
Coupling mode |
Differential mode 18μF, common mode 9μF/10Ω |
|
|
Number of surges |
1~9999 |
|
|
Interval |
10~9999s |
|
|
Power supply |
AC220V 50/60Hz |
|
|
Ambient temperature |
15℃~35℃ |
|
Our EMC Compliance Surge Tester 1.2/50 8/20 Combo Wave is made by multiple processes, highlighting the quality of the product. Never-ending improvement and striving for 0% deficiency are our two main quality policies. We keep on with supplying integration alternatives for customers and hope to create long-term, steady, sincere and mutual advantageous interactions with consumers.
Hot Tags: combination wave surge generator, China combination wave surge generator suppliers, manufacturers, factory, Impulse Voltage Generator, Electrostatic Discharge Simulator, Impulse Current Simulator, 6KV EMC Test Surge Generator, Burst Generator, spd surge immunity test
[[ProKeywords]]






