Overview
CIT6000-25 RF (Radio-frequency) conducted immunity test equipment adopts an integrated design, with built-in signal generator, RF power amplifier, and RF power meter. The device supports external power amplifiers, which has stronger system scalability. CIT6000-25 is equipped with a built-in industrial computer, with a dedicated RF conducted immunity testing software, which can perform fully automatic calibration and testing, greatly improving system scalability and testing efficiency. It supports users to view, save, and print test results on their own.
Features
- Built-in integrated signal generator, RF power amplifier and RF power meter
- Signal source: 4kHz~400MHz
- Power amplifier: 100kHz~230MHz, power 85W
- Power meter: 4kHz~500MHz
- Support external power amplifier
- 10.1" large color screen, 1280(H)×800(V) screen resolution
- Standard RF conducted immunity test software
Technical data
|
Model |
CIT6000-25 |
|
Name |
RF conducted immunity test equipment |
|
Standard |
IEC 61000-4-6, GB/T 17626.6 |
|
Power supply |
AC 220V±10%, 50/60Hz |
|
Ambient temperature |
0℃~+40℃ |
|
Relative humidity |
≤90% |
|
Signal generator |
|
|
Frequency range |
4kHz~400MHz |
|
Frequency resolution |
0.1Hz |
|
Frequency temperature stability |
±0.5ppm |
|
Harmonic distortion |
≤-25dBc |
|
Nonharmonic distortion |
≤-45dBc |
|
Output power range |
-60dBm~+10dBm |
|
Power accuracy |
±1.0dB |
|
Power resolution |
0.01dB |
|
Internal modulation source |
Sine wave: 0.1Hz~1.25MHz Square wave: 0.1Hz~100kHz Triangle wave/sawtooth wave: 0.1Hz~100kHz |
|
Amplitude |
Modulation depth: 1~99% Modulation rate: 20Hz~1.25MHz |
|
FM |
Max frequency deviation: 10MHz Modulation rate: 20Hz~1.25MHz |
|
Phase |
Phase modulation: 0°~360° Modulation rate: 20Hz~1.25MHz |
|
Pulse modulation |
Pulse period: 200ns~160s Pulse width: 100ns~85s Duty cycle: 1%~99% |
|
Output interface type |
N(F) |
|
Output standing wave ratio |
＜1.5:1 |
|
Power meter |
|
|
Frequency range |
4kHz~500MHz; Options support extended frequency range, max frequency can be extended to 1GHz or 6GHz |
|
Dynamic range |
-60dBm~+20dBm |
|
Power accuracy |
±0.2dB |
|
Input VSWR |
＜1.15:1 |
|
Input interface type |
Front: BNC (F) Rear: SMA (F) |
|
Power amplifier |
|
|
Frequency range |
100kHz~230MHz |
|
Power gain |
50dB |
|
Max output power |
100W |
|
1dB compression point output power |
85W |
|
Input impedance |
50Ω, VSWR＜1.5:1 |
|
Output impedance |
50Ω |
|
Output interface type |
N(F) |
|
Standard accessories |
|
|
6dB attenuator, 50Ω terminal load, CDN*1,CDN calibration kit*2, RF test cable |
|
|
Power cable, grounding wire, manual, test line, fuse*2 |
|
Hot Tags: rf conducted immunity test equipment, China rf conducted immunity test equipment suppliers, manufacturers, factory
